The VFI-RT+ series offer the latest in UPS technology. Highly efficient, these UPS systems are rack/tower mount, HID compliant and feature internal batteries but include a high capacity adjustable internal charger. The charging current can be adjusted according to how many external battery packs are connected, or the capacity of an external battery bank.
![](https://www.powerinspired.com/wp-content/uploads/2019/05/vfi-rt-scaled-1.jpg)
Product Features
Suitable for IT applications especially those with long runtime requirements.
Available in 1.5KVA & 3KVA models. 6 & 10KVA models are also available.
High Capacity Charger
![](https://www.powerinspired.com/wp-content/uploads/2023/07/vfi-rt-int-blur.jpg)
The default charge current on the VFI-RT+ is 2A, twice the level of standard UPS, allowing the internal batteries to be charged in half the time. For longer runtime applications with the addition of external batteries, standard UPS may take several days or more crucially might not fully recharge an external battery. The VFI-RT+ has an internal charger capable of delivery 8A (3KVA) and 12A (1.5KVA) allowing true fast recharge for high capacity batteries in long runtime applications.
![](https://www.powerinspired.com/wp-content/uploads/2019/05/rotating-lcd.jpg)
Configurable Format
The VFI-RT+ can be mounted horizontally in a 19″ rack, or vertically standing with the supplied vertical support brackets. Extenders are provided for any matching battery cabs. The LCD will rotate allowing for ease of viewing of UPS status. The LCD is also used for adjusting UPS parameters. These include:
- Adjusting output voltage to one of 200/208/220/230 or 240V.
- Setting Frequency Converter Mode to allow the unit to output a fixed 50 or 60Hz, regardless of input frequency.
- Enable or Disable ECO mode. This is a mode that reduces power protection performance but increases efficiency.
- Enable or Disable Bypass. In bypass mode the UPS will allow the input power through to the output when in standby or if the unit develops a fault or is overloaded.
- Enable or Disable the Programmable Outlets. When the unit reverts to battery operation you can set the programmable outlets to switch off after a certain time. Useful if you want to preserve battery capacity for more critical loads.
- Setting EPO (Emergency Power Off) polarity. The EPO port will shut down all UPS functions when activated. Normally Closed is the default position.
More settings are available, please refer to product manual.
![](https://www.powerinspired.com/wp-content/uploads/2019/05/hotswap_1200-150x150.jpg)
Hot Swap Battery Trays
Unit maintenance is simplified with the hot swap battery tray.
The front panel is unclipped revealing a support bracket that requires removal – the only operation needing a tool. The battery connector is then disconnected and the battery tray removed. A replacement tray can then be inserted.
This allows rapid exchange of batteries with zero downtime for the load.
The matching battery cabs also share this feature.
![](https://www.powerinspired.com/wp-content/uploads/2019/05/vfi1500rt_rear-act-scaled-1.jpg)
Connectivity
![](https://www.powerinspired.com/wp-content/uploads/2019/05/vfi1500rt_rear.png)
![](https://www.powerinspired.com/wp-content/uploads/2019/05/vfi3000rt_rear.png)
❶ Programmable Outlets. If set, these outputs will shut off after a pre-programmed time after the unit reverts to battery operation. Recommended for non-essential equipment.
❷ Output Receptacles. Non Programmable Outlets. These will remain powered as long as the UPS is on. Recommended for critical loads.
❸ Input Receptacle. IEC inputs, C14 on VFI1500RT+ and C20 on the VFI3000RT+
❹ Network Surge Protection. RJ45 connector which provides protection against “backdoor” surge events. You can also connect RJ11 modem/telecom leads.
❺ HID Compliant USB Port. Used for communication with a computer. HID compliance means the UPS will communicate directly with the power management protocol of the attached computer operating system.
❻ RS232 Interface. Legacy support for RS232 networks or for bespoke UPS communication systems.
❼ Intelligent Slot for Relay/SNMP. Ability to fit a network SNMP card allowing communication with the UPS over a network. Alternatively a relay card can be fitted which responds to UPS events. For example, mains fail, battery low and fault.
❽ Emergency Power Off (EPO) Connector. When triggered the UPS will instantly shut off mains output processes. The output will be shut off and the unit will alarm constantly.
❾ External Battery Connection. Used for connecting external battery packs to the VFI-RT+. The battery charge current can be adjusted to accommodate the additional battery cabs.